Installation Steps

Find the installation position of the hand crank of the intelligent drying rack, punch the hole: it is recommended that the height of the hand crank is 1M-1.2M from the ground, then determine the position of the corner device (Note: the position of the corner device must be perpendicular to the position of the hand crank, the red circle is the installation position of the hand crank).

Dehuan electronic technology next to determine the location of the intelligent drying rack installation of the four pulley rack: pulley rack on both sides from the wall is not less than 27CM, the vertical distance between the two wheels before the pulley is not less than 45CM, the horizontal distance between the two pulleys is 18CM or 2M, generally 2M, the specific by the location of the balcony according to the actual situation of the households, the installation location is determined and then determine the perforation with a pulley rack Position.

Wear the rope for the smart drying rack installation, next put 2 long wire ropes on the double pulley, put them on the other 2 single pulleys, and install the fixed cover as well. Cut the rope flat, then cut the 4 ends of the wire rope flat, the height is about the top of the hand crank, then install the rings, then 4 rings on the ends of the 2 drying poles, and then the flute inserts on the ends of the drying poles, so that the drying pole installation is complete. Assembling, put the back 2 sets of small accessories on, so the whole drying rack installation is completed.

In the above article, DEHUAN electronic technology for you to introduce some information about intelligent drying racks, we in this article mainly for you to introduce is about intelligent drying racks in the installation of some of the steps, you can see that we will be intelligent drying racks are divided into two parts of the installation for you to start to explain, we are in the part of the introduction of the installation of intelligent drying racks need to do what to prepare for, and then in the second part of the introduction of the is the installation of intelligent drying rack specific steps, you can refer to the text steps if you install yourself.